1. Cake-Scented Funfetti Candle
*2 pint-sized (16oz) mason jars
*Hot glue gun
*Pencils, pens, or something similar to hold the wicks in place
*2-3 tbsp water
*1-2 tbsp corn syrup
*A small paintbrush or cloth
*1/2 cup rainbow jimmies (or similar colorful sprinkles)
*1 lb soy wax flakes (or old candles if using smaller jars)
*Cupcake scented wax cubes (Also found at Michael’s)
*Measuring cup with spout
1. Use a hot glue gun to attach a wick to the bottom of the jar.
2. Mix together your corn syrup and water in a separate bowl, and coat the inside of the Mason jar with the mixture. A small paintbrush can help you reach the lower parts.
3. While holding the jar horizontally, add a spoonful of sprinkles and slowly roll the jar around to mix them up inside. Add another spoonful and repeat until the jar is covered completely.
3. Lay a pen or pencil across the tops of the jars and tape the wicks to them to keep the wicks centered.
4. Using a double boiler, or a make-shift one with a pot and heat-proof bowl (you can fill a pot half-full with water, bring to a simmer, and set metal bowl on top), melt the wax flakes and 3 or 4 of the scent cubes.
5. Pour two cups of melted wax into a measuring cup with a spout. Leave the rest of the melted wax in the bowl over simmering water. Then slowly pour the wax into the jar. Try to pour it directly into the center and away from the sides.
6. Freeze for 3-4 hours until the wax has firmed up, and then your Funfetti candle is ready to use!
2. Pretty Painted Votives
To achieve this artsy effect, simply scribble watery paint on the inside of a glass votive candle holder and let it dry.
Don’t mess with the paint too much, though, or they will end up brown!
3. Mercury Glass Votive
You’ll need mirror-like paint spray and a glass of your choice to make this votive holder.
Spray equal parts vinegar and water in between two to three light coats of the paint spray (depending on the size of your glass), then blot gently with a paper towel to create a weathered look.
4. Naturally Whimsical Tote-Candles
For this project, you’ll need a glass mason jar, a leather belt, some twine (or a wire), heather flower and a candle.
1. Cut the belt and make some holes for the twine /wire.
2. Tie your makeshift handle around the top of the candle, and then put the heather flower underneath it.
5. Stained Glass
*Tissue paper in your desired colors
*Mod Podge (matte finish), in a pinch you can also use school glue
*Glass containers to fit your candle(s)
*Paper punches in various shapes
1. Make your tissue paper shapes with your paper punches and set them aside.
2. Scoop out some Mod Podge (or glue) with your paintbrush and water it down for a thinner texture.
3. Place your tissue paper shapes on the candle and affix them with your paintbrush. Brush gently, and take your time!
4. After your candle is dry, you’ll notice that any surface of the votive brushed with Mod Podge and not affixed with a tissue paper shape will have a frosted look. If this bothers you, dip a Q-tip in hot water and gently scrub.
Most votive candle holders are around 2.5” tall, so measure, sketch and cut out a design on a sheep of colored paper accordingly.
First, tape a white strip of paper around the candle, then secure your design over it with clear tape.
*Painter’s tape cardboard core – or any tape core
*Jute rope – or any thick rope of preference
*Paper tape -or anything you want to use to cover the inner part of the tube
a. First, cover up the inside of the tube with paper tape or anything you wanna use to cover it up. Cut up the excess.
b. Now start wrapping rope around it, hot gluing every few inches.
c. When you get to the end, just cut the rope at an angle parallel to the wrapped tube.
d. Now take your twine, and braid it. After that, hot glue it on the edges of the tube like so. This is just purely for a cleaner finish, but it's up to you if you want to skip this step or not.
e. Finished and ready to use!
8. Photography Film Negative
Need something to do with all of those unexposed negatives? Even if you’ve fully switched to digital, you can make this candle using a black and white print-out, on vellum or transparencies, of your favorite photo!
*Photo negatives (black and white or color) or black and white print-outs of your favorite pictures on vellum or transparencies
*Glass candle holders
*Glue dots (double-stick tape works, too!)
a. Use your negatives to measure around your glass candle holder to see how many frames in your negative are needed to wrap around it.
b. Put some glue dots or double stick tape to both ends of your photo negative pieces.
c. Stick your negative pieces on your candle holder. Put a candle in and light it to admire your quick-n-crafty creation!
9. French Vanilla Candles
*Raid your kitchen or a local yard sale to find pretty – but mismatched or singular – bowls or cups.
*Vanilla beans, chopped
1.Using a double broiler or a microwave safe bowl, melt the wax.
2. Glue the wick in place at the bottom of the cup or just hold it in place with your hand (at the top, of course).
3. Pour in a small layer of wax and add a layer of coffee beans and vanilla beans. Then fill the rest of the cup with wax. You can stir wax with a chopstick to distribute the bean pieces if needed.
4. Let the wax harden and trim the wick.
*Box of crayons
*Votive candle holders
11. Glitter & Glow
Simply spray the inside of a votive holder with adhesive spray, then sprinkle and shake your choice of glitter (larger flakes are recommended) around until the surface of the vase is covered completely.
Please SHARE these creative and simple DIY candle projects!